MXL Pitch

Manufacturing Range: 2.2"-28.96" LP
Sample Belt Size: 22MXL050
400  -  2.2" LP*
MXL  - .08" Between Teeth
025  -  1/2" Top Width

MXL Timing Belts Coming Soon!

XL Pitch

Manufacturing Range: 6"-130" LP
Sample Belt Size: 400XL025
400  -  40" LP*
XL  - .2" Between Teeth
025  -  1/4" Top Width

Click Here for XL Pitch Timing Belts

L Pitch

Manufacturing Range: 6.75" - 198.75" LP
Sample Belt Size:  450L100
450  -  45" LP*
L  -  .375" Between Teeth
100  -  1" Top Width

Click Here for L Pitch Timing Belts

H Pitch

Manufacturing Range: 18" - 220" LP
Sample Belt Size: 1350H300
1350  -  135" LP*
H  -  .5" Between Teeth
300  -  3" Top Width

Click Here for H Pitch Timing Belts

XH Pitch

Manufacturing Range: 50.75" - 187.3" LP
Sample Belt Size:  630XH300
630  -  63" LP*
XH  -  .875" Between Teeth
300  -  3" Top Width

XH Timing Belts Coming Soon!

 XXH Pitch

Manufacturing Range: 70" - 180" LP
Sample Belt Size: 1000XXH500
1000  -  100" LP*
XXH  -  .125" Between Teeth
500  -  5" Top Width

XXH Timing Belts Coming Soon

5M Series

Manufacturing Range: 120mm - 1160mm LP
Sample Belt Size: 1000-5M-20
1000  -  1000mm LP*
5M  -  5mm Between Teeth
20  -  20mm Top Width

Click Here for 5M Timing Belts

 8M Series

Sample Belt Size: 1200-8M-37
1200  -  1200mm LP*
8M  -  8mm Between Teeth
37  -  37mm Top Width

Click Here for 8M Timing Belts

14M Series

Manufacturing Range: 826mm - 5320mm LP
Sample Belt Size: 966-14M-20
966  -  966mm LP*
14M  -  14mm Between Teeth
20  -  20mm Top Width

Click Here for 14M Timing Belts

Timing Belt Constuction

Timing belts are constructed with a highly flexible neoprene backing that provides excellent abrasion and wear resistance.  This is important if the if any power is transmitted from the back of the belt.  The backing also protects the tensile cords against moisture, grease, oil, dirt and any foreign object that may come in contact with the belt.  These belts are constructed with fiberglass tensile cords to guarantee dimensional stability to eliminate take up adjustments.  The teeth of the timing belt are formed of oil and heat resistant neoprene and have a shear resistance equal to the tensile strength of the belt.  Tooth design and tight manufacturing tolerances provide a consistent thickness and a constant circular pitch to assure full surface contact between the belt and pulley for optimal running characteristics.

In some applications, a stronger tensile cord may be required such as kevlar or steel.  More often than not the belt number will specify whether a stronger tensile cord is required.  If you think that your application might need a stronger tensile cord, call our belt experts and see how it could benefit you.

*Standard timing belts can not be used in lue of Gates Poly Chain Belts.  They are designed to work in extremely high torque and high horsepower situations.